Turn DPI up; turn in-game sensitivity down.iMPaCT.uK wrote:
why would u need 4000 DPi? what have u got monster sensistivity? wtf...
400 DPi is only thing intelli 3.0 can do and its all u need
l2physics/maths/common sensepauli *wsaf wrote:
60Hz screen ?= 60fps shown max? ... fail, that would work with V-sync on, bf2 has V-sync OFF and the difference is visible
Last edited by JoshP (2008-12-21 07:42:29)
http://forums.bf2s.com/viewtopic.php?id=106332JoshP wrote:
eh wut?Finray wrote:
But the engine responds to different FPS, so you can get different results, higher rpm, jump higher etc.JoshP wrote:
This. The average monitor displays at 60Hz, which means your monitor refreshes the picture 60 times in a second, which means that of your 250fps in COD4, you only get to see 60 of these frames.
i wasn't actually on about the game cod4Finray wrote:
http://forums.bf2s.com/viewtopic.php?id=106332JoshP wrote:
eh wut?Finray wrote:
But the engine responds to different FPS, so you can get different results, higher rpm, jump higher etc.
however what you are saying is correct
No.phishman420 wrote:
Turn DPI up; turn in-game sensitivity down.iMPaCT.uK wrote:
why would u need 4000 DPi? what have u got monster sensistivity? wtf...
400 DPi is only thing intelli 3.0 can do and its all u need
Oh. Ok.iMPaCT.uK wrote:
No.phishman420 wrote:
Turn DPI up; turn in-game sensitivity down.iMPaCT.uK wrote:
why would u need 4000 DPi? what have u got monster sensistivity? wtf...
400 DPi is only thing intelli 3.0 can do and its all u need
...
I have a CRT and I could see it clearlyFloppY_ wrote:
protip: Logo = silver, brightly lit silver looks whiteJoshP wrote:
wait theres a microsoft logo on thatJoshP wrote:
http://i44.tinypic.com/2aew3yv.jpg
but it didn't show up in the picture
invisible logo wat
0.o
I can see the logo on my screen :3
If you have a CRT that might be the reason why you cannot see it
Thats how I have it . 1600DPI/500Mhz and 0.3 in game sensphishman420 wrote:
Turn DPI up; turn in-game sensitivity down.iMPaCT.uK wrote:
why would u need 4000 DPi? what have u got monster sensistivity? wtf...
400 DPi is only thing intelli 3.0 can do and its all u need
Same here with my Mx518.Sup wrote:
Thats how I have it . 1600DPI/500Mhz and 0.3 in game sensphishman420 wrote:
Turn DPI up; turn in-game sensitivity down.iMPaCT.uK wrote:
why would u need 4000 DPi? what have u got monster sensistivity? wtf...
400 DPi is only thing intelli 3.0 can do and its all u need
I have disabled the low and high settings and boosted the normal to 1600dpi and adjusted game and OS sensitivity after that..
if you don't do it like that you are just wasting money
Your thoughts, insights, and musings on this matter intrigue me
You obviously have not used a quality CRT.FloppY_ wrote:
I want to see some of these CRTs deathunlimited...
I have never, EVER seen a CRT that could produce better images than my LG Flatron NT panel... nothing near it infact..
main battle tank karthus medikopter 117 megamegapowershot gg
Let alone quality CRT's, most CRT's have better image quality than LCD, some good CRT's can do 1080p almost twice, on a 19" screen, the pixels are so small the quality looks astonishing, but everyone's got an LCD now, because they're thinner, longer lasting, good quality screen, not bad on eyes, cheap now etc etcDeathUnlimited wrote:
You obviously have not used a quality CRT.FloppY_ wrote:
I want to see some of these CRTs deathunlimited...
I have never, EVER seen a CRT that could produce better images than my LG Flatron NT panel... nothing near it infact..
utfg -> v-sync utfg -> lcd refresh rate and maybe than u will understand that exactly at refreshRate*lines (e.g. 75*1024) fps you will have every new line displayed on your lcd with actual data, with time delay 1ms for generating+sending frame and x ms time delay for rise-time of each pixel to specific colorJoshP wrote:
l2physics/maths/common sensepauli *wsaf wrote:
60Hz screen ?= 60fps shown max? ... fail, that would work with V-sync on, bf2 has V-sync OFF and the difference is visible
Last edited by pauli *wsaf (2008-12-21 15:38:13)
ITT: bsthepilot91 wrote:
much quiicker rolls in choppers (bf2) and movements overall .iMPaCT.uK wrote:
why would u need 4000 DPi? what have u got monster sensistivity? wtf...
400 DPi is only thing intelli 3.0 can do and its all u need
You can only roll as fast as the game allows you, and if i can max it with 800 DPI why the fuck do you need 4000?
kpauli *wsaf wrote:
utfg -> v-sync utfg -> lcd refresh rate and maybe than u will understand that exactly at refreshRate*lines (e.g. 75*1024) fps you will have every new line displayed on your lcd with actual data, with time delay 1ms for generating+sending frame and x ms time delay for rise-time of each pixel to specific colorJoshP wrote:
l2physics/maths/common sensepauli *wsaf wrote:
60Hz screen ?= 60fps shown max? ... fail, that would work with V-sync on, bf2 has V-sync OFF and the difference is visible
Why do that? I did it with my G9, but only because I cbf'd Alt+Tab to change it through the driver.FloppY_ wrote:
Same here with my Mx518.Sup wrote:
Thats how I have it . 1600DPI/500Mhz and 0.3 in game sensphishman420 wrote:
Turn DPI up; turn in-game sensitivity down.
I have disabled the low and high settings and boosted the normal to 1600dpi and adjusted game and OS sensitivity after that..
if you don't do it like that you are just wasting money
Because I cba to press the "+" button every time I boot up my system when I can do a setup that allows me to quit worrying about what setting the mouse is on as i know it is allways on the highestsome_random_panda wrote:
Why do that? I did it with my G9, but only because I cbf'd Alt+Tab to change it through the driver.FloppY_ wrote:
Same here with my Mx518.Sup wrote:
Thats how I have it . 1600DPI/500Mhz and 0.3 in game sens
I have disabled the low and high settings and boosted the normal to 1600dpi and adjusted game and OS sensitivity after that..
if you don't do it like that you are just wasting money
"I paid for my DPI please use them"
Your thoughts, insights, and musings on this matter intrigue me
His fast barrel rolls are easier to TV, so let him continue to fail.N00bkilla55404 wrote:
ITT: bsthepilot91 wrote:
much quiicker rolls in choppers (bf2) and movements overall .iMPaCT.uK wrote:
why would u need 4000 DPi? what have u got monster sensistivity? wtf...
400 DPi is only thing intelli 3.0 can do and its all u need
You can only roll as fast as the game allows you, and if i can max it with 800 DPI why the fuck do you need 4000?
Who uses the mouse to control helicopters / jets in BF2 anyway?????phishman420 wrote:
His fast barrel rolls are easier to TV, so let him continue to fail.N00bkilla55404 wrote:
ITT: bsthepilot91 wrote:
much quiicker rolls in choppers (bf2) and movements overall .
You can only roll as fast as the game allows you, and if i can max it with 800 DPI why the fuck do you need 4000?
Last edited by FloppY_ (2008-12-21 18:00:01)
Your thoughts, insights, and musings on this matter intrigue me
Me and about everyone I know (helicopters, not jets).FloppY_ wrote:
Who uses the mouse to control helicopters / jets in BF2 anyway?????phishman420 wrote:
His fast barrel rolls are easier to TV, so let him continue to fail.N00bkilla55404 wrote:
ITT: bs
You can only roll as fast as the game allows you, and if i can max it with 800 DPI why the fuck do you need 4000?
loltangent.
My state was founded by Batman. Your opinion is invalid.
Feels gay to me whenever I try to pilot heli's with a mouse... I've got 10 times more control over thrust and pitch with the keyboard.. that and I don't look like an idiot moving my mouse repeatedly all over my desk to make the damn thing keep rollingphishman420 wrote:
Me and about everyone I know (helicopters, not jets).FloppY_ wrote:
Who uses the mouse to control helicopters / jets in BF2 anyway?????phishman420 wrote:
His fast barrel rolls are easier to TV, so let him continue to fail.
Your thoughts, insights, and musings on this matter intrigue me
Mouse piloting is essential for soloingFloppY_ wrote:
Feels gay to me whenever I try to pilot heli's with a mouse... I've got 10 times more control over thrust and pitch with the keyboard.. that and I don't look like an idiot moving my mouse repeatedly all over my desk to make the damn thing keep rollingphishman420 wrote:
Me and about everyone I know (helicopters, not jets).FloppY_ wrote:
Who uses the mouse to control helicopters / jets in BF2 anyway?????
main battle tank karthus medikopter 117 megamegapowershot gg
true that, i only managed to singleseat without completely failing once i got a config off myke which had good controls, and also switched to mouseDeathUnlimited wrote:
Mouse piloting is essential for soloingFloppY_ wrote:
Feels gay to me whenever I try to pilot heli's with a mouse... I've got 10 times more control over thrust and pitch with the keyboard.. that and I don't look like an idiot moving my mouse repeatedly all over my desk to make the damn thing keep rollingphishman420 wrote:
Me and about everyone I know (helicopters, not jets).
Your GFX card fan won't spin as fast. At least, when I lock mine down to ~60, it quiets down..Sup wrote:
Is there a benefit to locking your fps?
Why do you have only 500 Mhz?.Sup wrote:
Thats how I have it . 1600DPI/500Mhz and 0.3 in game sensphishman420 wrote:
Turn DPI up; turn in-game sensitivity down.iMPaCT.uK wrote:
why would u need 4000 DPi? what have u got monster sensistivity? wtf...
400 DPi is only thing intelli 3.0 can do and its all u need