Well despite millions of you telling me to go for the P900 or the P190 or even Lian-Li i went for the silverstone.
This is my work log from thoughout the day, and is a step by step picture of how it went together.
For people that want to know temps:
8800GTX 35C idle 43C full load (after gaming for a few hours)
Intel Core 2 Quad @ 3.6GHz 35C idle 43C full load (Intel thermal Analysis 100% on each core)
NO YOU CANNOT HAVE MY T-SHIRT
Case arrived and is stripped down.

Radiator is assembled (twin 120mm, 2x 120mm intake, 2x 120mm exhaust)

Radiator is finished (great succes!!!!)

Another rad shot

After mounting the rad to the top of the case, i cut a hole in the back with a dremel to thread the water tubes through.

Leak testing

Leak testing with added UV cathods

Another shot of leak testing (total leak testing = 14 hours)

Installing the 8800GTX water block (warning nekkid 8800GTX)

8800GTX Waterblock mounted rear

8800GTX Waterblock mounted front

Test fitting and tubes cut

Test fitting close up

Another test fit close up

Pump and resovair close up

CPU block close up

Radiator close up

Turning on the pump and testing inside the case for leaks

Adding some UV lights into the mix and still leak testing

Another leak testing shot (3 hours)

Leak testing complete time to power it on

Lights off shot

Another shot completed

cable managment is not done yet and i really cant be fucked at the moment sleep now, and then i31 tomorrow
This is my work log from thoughout the day, and is a step by step picture of how it went together.
For people that want to know temps:
8800GTX 35C idle 43C full load (after gaming for a few hours)
Intel Core 2 Quad @ 3.6GHz 35C idle 43C full load (Intel thermal Analysis 100% on each core)
NO YOU CANNOT HAVE MY T-SHIRT
Case arrived and is stripped down.

Radiator is assembled (twin 120mm, 2x 120mm intake, 2x 120mm exhaust)

Radiator is finished (great succes!!!!)

Another rad shot

After mounting the rad to the top of the case, i cut a hole in the back with a dremel to thread the water tubes through.

Leak testing

Leak testing with added UV cathods

Another shot of leak testing (total leak testing = 14 hours)

Installing the 8800GTX water block (warning nekkid 8800GTX)

8800GTX Waterblock mounted rear

8800GTX Waterblock mounted front

Test fitting and tubes cut

Test fitting close up

Another test fit close up

Pump and resovair close up

CPU block close up

Radiator close up

Turning on the pump and testing inside the case for leaks

Adding some UV lights into the mix and still leak testing

Another leak testing shot (3 hours)

Leak testing complete time to power it on

Lights off shot

Another shot completed

cable managment is not done yet and i really cant be fucked at the moment sleep now, and then i31 tomorrow
Last edited by rubber.sex (2007-08-08 18:40:13)