some_random_panda
Flamesuit essential
+454|6657

Pretty much self-explanatory.
Afroman.exe
Banned
+25|5962|Adelaide, Australia
From what i know normally your RAM will run at the speed that your motherboard can support....If your board can only support up to speeds of 667mhz then 800 mhz will get clocked down to work with the board..if that makes any sense.  If your board can support 800mhz but you only ever ran 667mhz. then aslong as you remove all the 667 sticks you should be fine...mismatched RAM gets slowed to the speed of the slowest stick...eg 2 800mhz and 1 667mhz run at 667...i think lol
AussieReaper
( ͡° ͜ʖ ͡°)
+5,761|6420|what

Where did you get those components?

on other forums a quick search:

well it will work. If you plug in the ram and are not overclocking yet, you can set your ram to run at up to 667mhz (or slower). But you won't regret that your ram can go faster than that once you start overclocking. If you run your ram at 667mhz (which should be 5:4 if your standard FSB is 533) and overclock your fsb to 640mhz your ram will be running at 800.
http://forums.extremeoverclocking.com/t235154.html

Last edited by TheAussieReaper (2008-09-24 00:44:57)

https://i.imgur.com/maVpUMN.png
Afroman.exe
Banned
+25|5962|Adelaide, Australia
lol at the guy on that forum who posted the original question......

What would happen if I can faster ram. Maybe a ram at 800mhz. Is this possible to do on a motherboard that does not made for 667?
AussieReaper
( ͡° ͜ʖ ͡°)
+5,761|6420|what

Afroman.exe wrote:

What would happen if I can faster ram. Maybe a ram at 800mhz. Is this possible to do on a motherboard that does not made for 667?
Don't laugh, that was Panda also.
https://i.imgur.com/maVpUMN.png
Afroman.exe
Banned
+25|5962|Adelaide, Australia
you serious??    wow   the posts seem completely different, like 2 completely dif people wrote it...my bad

hang on a sec..............

Last edited by Afroman.exe (2008-09-24 00:52:17)

Cybargs
Moderated
+2,285|6983
No. Tried it along time ago. Comp would not boot
https://cache.www.gametracker.com/server_info/203.46.105.23:21300/b_350_20_692108_381007_FFFFFF_000000.png
some_random_panda
Flamesuit essential
+454|6657

TheAussieReaper wrote:

Afroman.exe wrote:

What would happen if I can faster ram. Maybe a ram at 800mhz. Is this possible to do on a motherboard that does not made for 667?
Don't laugh, that was Panda also.
I think he was talking about the grammar.
AussieReaper
( ͡° ͜ʖ ͡°)
+5,761|6420|what

So did you end up trying it?
https://i.imgur.com/maVpUMN.png
some_random_panda
Flamesuit essential
+454|6657

TheAussieReaper wrote:

So did you end up trying it?
I'm going to the shop to get the stuff tomorrow.

Hoping that they'll have 667 though, as I already have 1 gb.
Bertster7
Confused Pothead
+1,101|6848|SE London

Should work fine. Just a bit slower.
Agent_Dung_Bomb
Member
+302|7003|Salt Lake City

I have 800MHz RAM running in my system with a bus speed of 667MHz.
DUnlimited
got any popo lolo intersting?
+1,160|6730|cuntshitlake

Yes but there is no point. It will run at 667MHz.
main battle tank karthus medikopter 117 megamegapowershot gg
some_random_panda
Flamesuit essential
+454|6657

DeathUnlimited wrote:

Yes but there is no point. It will run at 667MHz.
Well, if I get a 800 in future, I might make use of it.

They didn't have 667 anyway, and now it's in and running smoothly.

Board footer

Privacy Policy - © 2025 Jeff Minard