Hardware Test Tool?!

2006-12-07 10:53:55

#1

TheOne 3had0w: Member; +3|6945|Austria

hy,

well i have since last weeks a new mobo and cpu
its a asus A8N32-Sli deluxe and an AMD 64 X2 4600
BUT:

my system performance is lower than bevore ?! (Asrock dual sata2 + amd64 3800)
well in bf 2142 i have "little" laggs and sometimes a freeze for 2-3sec.
i had a little accident with a new graphik card cooler
and now i need to know witch component is damaged or not 100% to use..

well sorry for my english.. im from austria and i have enough troubles with my own language

so please any help

2006-12-07 11:05:11

#2

Rainnmann: Member; +3|6958

What happend with the accident with the cooler?
How do you know the new system is slower? 3dmark or some other test software?

2006-12-07 11:11:55

#3

TheOne 3had0w: Member; +3|6945|Austria

well i guess 3d mark just test the "output"
i dont tested my system bevore..
the accident was a short circuit on the graphik card because of some wrong screws..
and i know its slower because the hole laggs in bf 2142 wasnt there with the old system

Last edited by TheOne 3had0w (2006-12-07 11:12:49)

2006-12-07 11:22:25

#4

Greenboi: Member; +14|6823

New drivers, did you reinstall windows? if not, you MUST do this when you get new hardware such as a new mobo (graphic cards you can get away with)

try a different graphics card, if it was a short circuit, im sure its causing the problem, try a friends in your system, or an old one to see if it works.

But mainly install new drivers and make sure you have a fresh copy of windows installed

2006-12-07 11:28:19

#5

TheOne 3had0w: Member; +3|6945|Austria

well THX
i have installed windows since the new F*U*C*K*E*D mobo
about 100 times ..
and yes i have the newest driver, bios, firmewares
well ok i though some of u knows a tool to test that hole things..
i will resell the mobo anyway because its full of errors..
maybe it will be better with the new one..

2006-12-07 11:29:06

#6

darthazeem: Member; +7|6928

When I changed my Mobo I didnt have to reinstall windows all I had to do was update the Northbride, Southbridge, Memory controllers, IDE controllers, etc, when it was all finished all worked incredibly well. I didnt lose any data and the system runs much better now.

https://www.bf2sigs.net/sigs/2/7/67240774.png

2006-12-07 11:42:11

#7

Greenboi: Member; +14|6823

darthazeem wrote:
When I changed my Mobo I didnt have to reinstall windows all I had to do was update the Northbride, Southbridge, Memory controllers, IDE controllers, etc, when it was all finished all worked incredibly well. I didnt lose any data and the system runs much better now.

http://www.bf2sigs.net/sigs/2/7/67240774.png

Its usualy better to reinstall windows, because when you install it, it configures itself to your current hardware config. So when you reinstall, it does it nice and fresh, obviously computers do what they like, what you did may work for you but not for others... such as me i gave up and just went for the reinstall lol

I cant think what it would be, but the motherboard wouldnt be causing the lag, its got to be one of the other components

What graphics card do you have? from my experience, nvidia ones have this tendancy to turn on anti-aliaising and anistropic filtering and such by itself, just tweak the drivers a bit.

2006-12-07 11:43:56

#8

JT_001: Member; +17|6876|Canada

Buy An Etch-a-sketch!

2006-12-07 11:47:15

#9

Snowmanimal: Not so unique forum title; +30|6998|My head

Did you update the BIOS?

2006-12-07 13:45:29

#10

TheOne 3had0w: Member; +3|6945|Austria

Snowmanimal wrote:
Did you update the BIOS?

yo i have..
well this mobo fucked up..
well nevermind, i try to give it back and i will see
because it will be better..

its just horrible to spend so mutch money and more mutch time and all u get is a piece of ****

BF2S Forums Hardware Test Tool?!

darthazeem wrote:

Snowmanimal wrote:

Board footer