Just as I promised, my E6300 overclock!

2007-03-15 12:42:59

#1

link52787: Member; +29|6986

Here it is, it overclocks better than my E4300.

http://valid.x86-secret.com/show_oc?id=177900

Can't break the 3.33ghz barrier on this baby but its still good.

1.52 volts
ram is at 2.2 volts

I wish I could tighten the ram a little bit more.

2007-03-15 13:53:36

#2

Jbrar: rawr; +86|7006|Winterpeg, Canada

smexy

2007-03-15 14:07:53

#3

Kmar: Truth is my Bitch; +5,695|7065|132 and Bush

What's your temps at 1.52 volts?

Xbone Stormsurgezz

2007-03-15 14:15:10

#4

B00MH3ADSH0T: Fresh NoobCaeks Here; +118|6854|Penrith,Nsw, Aus

yea what are the temps because i have the same cpu and mobo as you so i might give it a try.

2007-03-15 14:18:31

#5

link52787: Member; +29|6986

Right now I am orthos testing it right now and its at 41C

2007-03-15 14:21:05

#6

Kmar: Truth is my Bitch; +5,695|7065|132 and Bush

link52787 wrote:
Right now I am orthos testing it right now and its at 41C

What kind of cooling?

Xbone Stormsurgezz

2007-03-15 14:24:37

#7

link52787: Member; +29|6986

air cooling, I'm using a gigabyte cooler: http://www.newegg.com/Product/Product.a … 6835128009

I added a 40mm fan right next to the NB heat sink, tilted so it will also cool RAM sticks. I also have a 120mm fan as a exhaust.

2007-03-15 14:31:11

#8

stryyker: bad touch; +1,682|7184|California

I rate that as fairly impressive-very impressive

I could never get my friends E63 past 2.9, so many things went wrong.

2007-03-15 14:34:17

#9

Kmar: Truth is my Bitch; +5,695|7065|132 and Bush

Damn, I'm using http://www.newegg.com/Product/Product.a … 6835118019 and when I trun my voltage up that high I start creeping into the mid to high 50's c and I'm on a 680i chipset now.
Here is my specs Intel Core 2 Duo x6800 Extreme Edition
BFG 8800 GTX |4 GB DDR2 800 | BFG 680i Mobo
1.3 TB WD Dual Raptors 10k RPM Raid 0 150x2
Internal HD 2 Western Digital 500GB+Lacie 500 GB EXT HD

I wonder why I'm running so high.

Xbone Stormsurgezz

2007-03-15 14:36:48

#10

link52787: Member; +29|6986

stryyker wrote:
I rate that as fairly impressive-very impressive

I could never get my friends E63 past 2.9, so many things went wrong.

Is it on the same board as mine? GA-965P-DS3

You need to cool the NB heat sink, cause if you don't you will hit a FSB wall will fast. Put a fan above the heat sink, I jerry rigged mine like this:

http://www.imagecoast.com/images/link496/att00008.jpg

The NB got so hot before I placed the fan on it, I could grill a piece of meat on it, literally.

Last edited by link52787 (2007-03-15 14:37:42)

2007-03-15 14:42:02

#11

link52787: Member; +29|6986

Kmarion wrote:
Damn, I'm using http://www.newegg.com/Product/Product.a … 6835118019 and when I trun my voltage up that high I start creeping into the mid to high 50's c and I'm on a 680i chipset now.
Here is my specs Intel Core 2 Duo x6800 Extreme Edition
BFG 8800 GTX |4 GB DDR2 800 | BFG 680i Mobo
1.3 TB WD Dual Raptors 10k RPM Raid 0 150x2
Internal HD 2 Western Digital 500GB+Lacie 500 GB EXT HD

I wonder why I'm running so high.

That is a good HSF, try running Intel TAT, to see your exact temp threshold.

2007-03-15 21:53:19

#12

Kmar: Truth is my Bitch; +5,695|7065|132 and Bush

link52787 wrote:
Kmarion wrote:
Damn, I'm using http://www.newegg.com/Product/Product.a … 6835118019 and when I trun my voltage up that high I start creeping into the mid to high 50's c and I'm on a 680i chipset now.
Here is my specs Intel Core 2 Duo x6800 Extreme Edition
BFG 8800 GTX |4 GB DDR2 800 | BFG 680i Mobo
1.3 TB WD Dual Raptors 10k RPM Raid 0 150x2
Internal HD 2 Western Digital 500GB+Lacie 500 GB EXT HD

I wonder why I'm running so high.
That is a good HSF, try running Intel TAT, to see your exact temp threshold.

Will do. What brand of thermal paste are you using?

Xbone Stormsurgezz

2007-03-15 21:59:56

#13

link52787: Member; +29|6986

I'm using Arctic Silver 5. Good stuff.

2007-03-15 22:08:09

#14

Kmar: Truth is my Bitch; +5,695|7065|132 and Bush

link52787 wrote:
I'm using Arctic Silver 5. Good stuff.

Yea I have a feeling this ghetto paste I'm using has allot to do with it. Local PC shop doesn't have the good stuff in stock right now. My next decent online parts purchase i will throw some of that in there also.

Xbone Stormsurgezz

2007-03-16 07:48:35

#15

Bertster7: Confused Pothead; +1,101|7045|SE London

1.52V for a 6300! That's a lot! I get 3.5GHz from 1.4ishV.

2007-03-16 07:50:41

#16

link52787: Member; +29|6986

Bertster7 wrote:
1.52V for a 6300! That's a lot! I get 3.5GHz from 1.4ishV.

all chips are different, mine can't do 3.5 @ 1.4volts, you're pretty lucky. I can 3.5 ghz but with higher volts.

2007-03-16 07:51:20

#17

Kmar: Truth is my Bitch; +5,695|7065|132 and Bush

Bertster7 wrote:
1.52V for a 6300! That's a lot! I get 3.5GHz from 1.4ishV.

Lol.. that's what I thought, at only 41c none the less. He has something going right with his cooling.

Xbone Stormsurgezz

2007-03-16 08:14:28

#18

link52787: Member; +29|6986

okay, here is my SupePis

http://www.imagecoast.com/gallery.php?g … uperpi.jpg
http://www.imagecoast.com/gallery.php?g … perpi2.jpg

you have to click twice to enlarge.

The timings are okay, there decent

2007-03-16 08:34:46

#19

David.P: Banned; +649|6738

I'm gonna see how high i can oc my e6400. Btw what cooler are you using?

2007-03-16 08:43:26

#20

Kmar: Truth is my Bitch; +5,695|7065|132 and Bush

David.Podedworny wrote:
I'm gonna see how high i can oc my e6400. Btw what cooler are you using?

http://www.zalman.co.kr/usa/product/vie … p;code=009 Make sure you get some good paste. I think the junk I am using is killing me.

Xbone Stormsurgezz

BF2S Forums Just as I promised, my E6300 overclock!

link52787 wrote:

stryyker wrote:

Kmarion wrote:

link52787 wrote:

Kmarion wrote:

link52787 wrote:

Bertster7 wrote:

Bertster7 wrote:

David.Podedworny wrote:

Board footer