Pages: 1

 

2007-04-08 18:35:51
CommieChipmunk
Member
+488|7036|Portland, OR, USA
Jesus this Vista thing is just nothing but problems :p

Okay, hopefully this is the last bug I have to work out.

I have a Coolermaster stacker 830 (in black, because black is more 1337 than silver)

http://www.newegg.com/Product/Product.a … 6811119103

So I have 7x120mm fans running (plus like 4 other little ones cooling my video card and ram)

And all of them work, except one.  Now don't go telling me I have a dead fan, because this one works right when I boot it up but after like 2 or 3 seconds it stops (it has a blue LED so that goes out and the fan stops.. that's how I know).

I have an Evga 680i mobo so I can hook up a lot of fans, but not all of them, so I bought a fan controller which I hook the 4 side fans up to.  The one I hook the top one up to (the one that doesn't work) is on the motherboard Along with 1 other fan and my ram fan (they all use the 3 pin connectors).

So aside from using one of my adapters to turn the 3 pin into a molex -- is there a bios setting that's not letting it run or what?
2007-04-08 19:21:51
maffiaw
ph33r me 傻逼
+40|6887|Melbourne, AUS
wow you seem to have masses of fans - check PSU power. As Vista takes up more hardware even when running idle, it could be giving your psu a run for its money.
if not, try running the fan on another pc.
it might not hurt to recheck fan connections to the mobo

my 2c.
2007-04-08 19:27:54
CommieChipmunk
Member
+488|7036|Portland, OR, USA
750w power supply.

Don't think power is an issue -- only a 7900 gt, 1 HDD, e6600.  And it works right before it starts up
2007-04-09 04:24:07
max
Vela Incident
+1,652|7034|NYC / Hamburg

maybe some BIOS setting that will only spin that fan if some component gets too hot? Try installing speedfan or smart guardian or whatever to force the fan
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot  xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
2007-04-09 04:48:41
Stormscythe
Aiming for the head
+88|7016|EUtopia | Austria
I also think that the motherboard controls the fan's rotation and assumes the fan would even turn with 5V or something like this. As it's a LED-fan, however, it's not meant to be used below stock speeds and voltage.
I've got have a LED fan that doesn't work below 9V aswell.

 

Pages: 1

Board footer

Privacy Policy - © 2025 Jeff Minard