link52787
Member
+29|6992
I know some motherboards have a hard time using all four dimms while overclocking.

so far I can't get my DS3 to overclock with 4 sticks.  Originally I had 2gbs (2*1gb) and the cpu ran fine @ 3.5ghz, ram @ 4-4-3-5 @ 2.3 volts.  I wanted to add 2more sticks to make it 4gbs but I would fail the memtest, even with loosening up the timings to 5-5-5-15.

anyways, are there any motherboards out there that can take and overclock with all four sticks?

I am not going to RMA my board just because it won't overclock with 4 sticks,  Right now I have it stock, memtesting on all four sticks.  So its doing good @ stock specs.


anybody here running four sticks?

Last edited by link52787 (2007-04-28 18:55:29)

The Stillhouse Kid
Licensed Televulcanologist
+126|7112|Deep In The South Of Texas
What is command rate set to? Setting to 2T might help with stability.
link52787
Member
+29|6992
2T.

the thing about C2D motherboards is, that the command rate will always set to 2T if all four dimms are used. 

I've tried loosening up the timings and tried raising the volts to it a little bit.

Board footer

Privacy Policy - © 2025 Jeff Minard