killinzero1
Member
+14|6666
well i having a issue with my usb drives and when i plug in my ipod and hass a error saying usb hub power exceeded. and was wondering how it causes this. and how do i fix this issue thank you
https://img148.imageshack.us/img148/305/34042767rk2.jpg

Last edited by killinzero1 (2008-02-16 15:22:56)

blademaster
I'm moving to Brazil
+2,075|6924
hehhee like the Mom's folder +1 for that, get  a new hub with more ports on it if the one you have is already stacked up.
killinzero1
Member
+14|6666
sad thing is i believe my ipod connector is directly in the mobo
.Sup
be nice
+2,646|6732|The Twilight Zone
Does your usb hub have a power cable?
What's the specs of your power supply?

Last edited by .Sup (2008-02-16 15:27:30)

https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
Ender2309
has joined the GOP
+470|6850|USA
its because of the fact that ipod charges over usb. switch to a port on the motherboard  and try it again.
killinzero1
Member
+14|6666

.Sup wrote:

Does your usb hub have a power cable?
What's the specs of your power supply?
off the top of my head i am not sure
killinzero1
Member
+14|6666

Ender2309 wrote:

its because of the fact that ipod charges over usb. switch to a port on the motherboard  and try it again.
it happens to all my usb
blademaster
I'm moving to Brazil
+2,075|6924
found this stuff if its useful

n this message, XX represents the name of the device you are attempting to use. The message signifies that you have too many devices needing power through the USB port. While it is true that the USB port can daisy chain up to 127 devices and provide power to devices that don’t have an external power supply, there is a limit to the power part of the attribute. The error message indicates that you have reached the USB device power-providing limit of the USB port.

Solution:
Add an internal USB expansion card or an external self-powered USB hub. Another solution is to just add only self-powered USB devices to the daisy chain.

Some external self-powered USB hubs ($15 to $40) currently available include Ark Technologies’ UB5142 Hub (http://www.arkpc.com), D-Link’s DSB-H4 Hub (http://www.dlink.com), Iogear’s 4-Port USB Hub (http://www.iogear.com), and Linksys’ USBHUB04 Hub (http://www.linksys.com).

another solution

If you receive this error message, you should look for ways to get additional power to your USB devices. An external power supply is the best option. Another option is to add an external USB port to your system.

here you can find those self powered usb hubs which they recommend
http://shopper.cnet.com/hubs/4port-12mb … 52592.html
http://www.amazon.com/dp/B00006B8BM?smi … nkCode=asn
http://www.google.com/products?q=self-p … coring=prd

Last edited by blademaster (2008-02-16 15:32:32)

.Sup
be nice
+2,646|6732|The Twilight Zone
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
killinzero1
Member
+14|6666
is there a possible way to reset it?
blademaster
I'm moving to Brazil
+2,075|6924

.Sup wrote:

I like this one from Logitech
http://www.mimovrste.com/artikel/199001 … napajalnik
is it self powered he needs self powered one since usb drive is messed up. he cant connect to the usb from what I understood.
.Sup
be nice
+2,646|6732|The Twilight Zone

blademaster wrote:

.Sup wrote:

I like this one from Logitech
http://www.mimovrste.com/artikel/199001 … napajalnik
is it self powered he needs self powered one since usb drive is messed up. he cant connect to the usb from what I understood.
"USB HUB Logitech Premium 4 portni + napajalnik"=Translation: USB HUB Logitech Premium 4 port + power supply
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
blademaster
I'm moving to Brazil
+2,075|6924
This will occur if there are too many USB devices attached to a passive (unpowered) USB hub.To resolve this problem, replace the passive USB hub with an active (powered) hub.

NOTE: To workaround this problem, disconnect the affected device and connect it directly to the USB host controller in the back of your computer.
Freezer7Pro
I don't come here a lot anymore.
+1,447|6476|Winland

blademaster wrote:

This will occur if there are too many USB devices attached to a passive (unpowered) USB hub.To resolve this problem, replace the passive USB hub with an active (powered) hub.

NOTE: To workaround this problem, disconnect the affected device and connect it directly to the USB host controller in the back of your computer.
Yes, connect it straight to the mobo. Also disconnect any other USB pheripherals on the sister port.
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP

Board footer

Privacy Policy - © 2025 Jeff Minard