Freezer7Pro
I don't come here a lot anymore.
+1,447|6476|Winland

So, today we went to our ISP to get a new, faster 28mbit connection (as opposed to the old 512kbit one), and they asctivated it straight away.

When i get home, I thought I'd try it out, and went to speedtest.net, and got a mere 5 mbit out of it. I rebooted my router, and got the full speed (About 15mbit). Sweet, I thought, and went to YouTube to see if I could stream videos properly, which has barely worked on the old connection. This is where the troubles start.

I get onto YouTube, and the site runs faster than ever, until I get to actually playing a video. It buffers for about 20 secons, and plays for 10. Buffers for 20, plays for 10. Ok, maybe the YouTube servers are overloaded, but no, I've tried many times at different times and videos. Same result. Ok, maybe I need to reconfigure this thing, it's been a while since I last visited that horrible setup web-interface. But, lo and behold, the setup can't be accessed! Not even resetting to factory settings works.

Everything else works flawlessly, I downloaded a 720p movie in under an hour, but I don't know what to do about the YouTube problem, and that I can't access the setup. Halp?
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
Agent_Dung_Bomb
Member
+302|7014|Salt Lake City

What make/model is the router.  It's odd that you can't get the web interface to load, as it is part of the router firmware.  For that to not load, especially after a hard reset, would tend to indicate the firmware is hosed.
SgtHeihn
Should have ducked
+394|6765|Ham Lake, MN (Fucking Cold)
I've been having the same type of troubles with you tube and you porn also. It will load up 1/2 to 3/4 of the video and then wont play anymore after that. (it just stops)
Funky_Finny
Banned
+456|6411|Carnoustie, Scotland
28Mb?!?!

Or is mbit different from mbyte?
steelie34
pub hero!
+603|6660|the land of bourbon

Funky_Finny wrote:

28Mb?!?!

Or is mbit different from mbyte?
yes... megabit, 100,000 bits, 8 bits in a byte, u do the math.
https://bf3s.com/sigs/36e1d9e36ae924048a933db90fb05bb247fe315e.png
steelie34
pub hero!
+603|6660|the land of bourbon
is the router firmware compatible with the browser you're trying to get to it with?
https://bf3s.com/sigs/36e1d9e36ae924048a933db90fb05bb247fe315e.png
Funky_Finny
Banned
+456|6411|Carnoustie, Scotland

steelie34 wrote:

Funky_Finny wrote:

28Mb?!?!

Or is mbit different from mbyte?
yes... megabit, 100,000 bits, 8 bits in a byte, u do the math.
no u
Parker
isteal
+1,452|6673|The Gem Saloon
ok dude, you know more about this shit than i do, but i have had WAY too many problems with my router/card, so ill tell you what i do every time it shits out on me.


first, i unplug everything, and let it all cool off for about 30 minutes or so.
then reconnect everything, and check the IP, etc.
then, check to see if there are firmware/driver updates for the router/card.
then check to see if there are any updates for the modem.


since you said you cant even access the router setup page, i would just unplug that thing for a while and see if that helps at all.....i know, its like the least amount of advice i can offer, but it helps me when mine starts acting up.
Funky_Finny
Banned
+456|6411|Carnoustie, Scotland
There should be a "reset" button on the back/underside of your router.

Press it and hope. That's what I do.
Freezer7Pro
I don't come here a lot anymore.
+1,447|6476|Winland

Funky_Finny wrote:

There should be a "reset" button on the back/underside of your router.

Press it and hope. That's what I do.
I have.

Gotta try witht he cool down method when my downloads are finished.
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP

Board footer

Privacy Policy - © 2025 Jeff Minard