Sydney
2λчиэλ
+783|7143|Reykjavík, Iceland.
I set my voltage to auto, running stable, CPU-Z shows 1.408V.

Isn't that unnecessarily high? Wouldn't it run quite stable a little bit lower?
GC_PaNzerFIN
Work and study @ Technical Uni
+528|6714|Finland

PBAsydney wrote:

I set my voltage to auto, running stable, CPU-Z shows 1.408V.

Isn't that unnecessarily high? Wouldn't it run quite stable a little bit lower?
I run my G0 stepping E6750 at 1.425V @3.5GHZ. That vcore is perfectly fine. Unless you have heat problems...
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
Cybargs
Moderated
+2,285|7016
CPU-Z is unreliable for voltages... that's a pretty good volt rate IMO. I got mine cranked to 1.58v at 3.5 Ghz lulz.
https://cache.www.gametracker.com/server_info/203.46.105.23:21300/b_350_20_692108_381007_FFFFFF_000000.png
siciliano732
Member
+202|6949|New York
i want to OC my GO Stepping Q6600...dont know how though.
Sydney
2λчиэλ
+783|7143|Reykjavík, Iceland.

GC_PaNzerFIN wrote:

PBAsydney wrote:

I set my voltage to auto, running stable, CPU-Z shows 1.408V.

Isn't that unnecessarily high? Wouldn't it run quite stable a little bit lower?
I run my G0 stepping E6750 at 1.425V @3.5GHZ. That vcore is perfectly fine. Unless you have heat problems...
Temps are fine.

cyborg_ninja-117 wrote:

CPU-Z is unreliable for voltages... that's a pretty good volt rate IMO. I got mine cranked to 1.58v at 3.5 Ghz lulz.
Everest reports 1.188 when multiplier is at 6x, 1.350 when 9x.

Core temp says 1.350 too.

Last edited by PBAsydney (16 years, 12 months ago)

CrazeD
Member
+368|6973|Maine
Never set voltage to auto.
Sydney
2λчиэλ
+783|7143|Reykjavík, Iceland.
All right, I'll just leave it at stock, 1.3500 since it seems to work.

What about RAM and FSB voltages?
ghettoperson
Member
+1,943|6949

Mine is at 1.335v @ 3.33Ghz. I win.
Sydney
2λчиэλ
+783|7143|Reykjavík, Iceland.
Did you change any voltages at all?
[CANADA]_Zenmaster
Pope Picard II
+473|7046

ghettoperson wrote:

Mine is at 1.335v @ 3.33Ghz. I win.
Air or liquid cooling? Case temp? Ortho's stable? I am curious because that sounds like bullshit. Loading both cores to 100% should see a few crashes every 10-15mins on  such low voltage unless you live in Siberia and wear mittens while playing bf2 haha.
GC_PaNzerFIN
Work and study @ Technical Uni
+528|6714|Finland

Meh... I can run 3.33Ghz at 1.35v (-vdrop) too. but 3.5ghz needs more.
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8

Board footer

Privacy Policy - © 2025 Jeff Minard