New CPU ... no boot!

2008-06-03 13:18:53

#1

seb--morin: Im high; +152|6910|Montréal, Québec

Okay so i changed my 3800+ for a 5200+ and now when i turn on my PC, everything start, all fan run but it wont even boot the bios... :S I don't know if i have to make a "reset" on my mobo, i know that there is a button or the battery that can do a reset...

I need help !!!!!!!

thks a lot for anyone that help, this is the 1st time i change a part in my pc exept maybe a HD...

2008-06-03 13:21:07

#2

i g: Banned; +876|6134|GA

did you put it in the right way?

2008-06-03 13:21:57

#3

.Sup: be nice; +2,646|6723|The Twilight Zone

If theres no reset button on ur mobo (look in the manual) then take the battery out for couple of seconds and then put it back in. And be sure that power cable is unplugged!

https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png

2008-06-03 13:22:11

#4

Gooners: Wiki Contributor; +2,700|6902

Did you put the grease on the side with teh pins?

2008-06-03 13:22:27

#5

DUnlimited: got any popo lolo intersting?; +1,160|6733|cuntshitlake

What mobo.

main battle tank karthus medikopter 117 megamegapowershot gg

2008-06-03 13:24:54

#6

SpIk3y: Minister of Silly Walks; +67|6409|New Jersey

Do what .Sup said.

Also make sure the CPU, RAM, Video Card, etc. are seated correctly. Maybe you accidentally knocked something loose while you were fiddling with the CPU, so check all data and power cables also.

2008-06-03 13:25:49

#7

.Sup: be nice; +2,646|6723|The Twilight Zone

SpIk3y wrote:
Do what .Sup said.

Also make sure the CPU, RAM, Video Card, etc. are seated correctly. Maybe you accidentally knocked something loose while you were fiddling with the CPU, so check all data and power cables also.

Check ram first.

2008-06-03 13:26:41

#8

Nessie09: I "fix" things; +107|6940|The Netherlands

You may be in need of a bios update.
Some mobo's only work with some CPU's after an update.

2008-06-03 13:28:07

#9

.Sup: be nice; +2,646|6723|The Twilight Zone

Nessie09 wrote:
You may be in need of a bios update.
Some mobo's only work with some CPU's after an update.

Thats very true too. See what processors ur mobo supports (on mobo's site) and if your new proc isn't on the list that might be the problem then.

2008-06-03 13:30:31

#10

seb--morin: Im high; +152|6910|Montréal, Québec

OKay so yes i've set it correctly in the right side, it has grease, and everything seem in place, i was very carefull... I'm going to look in the mobo manual and if it don't work, how im supposed to update my bios if i can't even get to it?

Thks a lot guys im going to search the manual right now, i'll check back here in about 10 minutes!

* asus M2N-SLI DELUXE

Last edited by seb--morin (2008-06-03 13:32:07)

2008-06-03 13:44:35

#11

seb--morin: Im high; +152|6910|Montréal, Québec

I forgot to say that i dindn't unplug the power cord when i changed the cpu, i only turned the power suply off with the switch behind...

I removed the battery for like 10 seconds and i doesn't change anything but now there is a little noise like a beep, but not the beep you usualy hear...

HALLLPPPP!

Last edited by seb--morin (2008-06-03 13:51:05)

2008-06-03 13:45:27

#12

Nessie09: I "fix" things; +107|6940|The Netherlands

Depends on the proccessor version, but according to this page you may be in need of version 1201.

2008-06-03 13:53:10

#13

seb--morin: Im high; +152|6910|Montréal, Québec

Well how im going to update my bios? The revision # on the mobo is 1.01 ... So i dwl the latest one but i dont know how to flash my bios? Do i need to but back the old one, and will it start with the 3800?

Last edited by seb--morin (2008-06-03 13:59:26)

2008-06-03 13:59:04

#14

.Sup: be nice; +2,646|6723|The Twilight Zone

seb--morin wrote:
Well how im going to update my bios? Do i need to but back the old one, and will it start with the 3800?

I don't know much about BIOS updating but on your mobo's website there has to be a manual on how to update your bios, usually in the same folder as the bios.

2008-06-03 14:04:03

#15

Obiwan: Go Cards !!; +196|6964|The Ville

reset the mobo with the jp1 jumper

2008-06-03 14:05:00

#16

.Sup: be nice; +2,646|6723|The Twilight Zone

Obiwan wrote:
reset the mobo with the jp1 jumper

I presume he already did this since this is what i told him to do first.

2008-06-03 14:36:25

#17

Brasso: member; +1,549|6900

.Sup wrote:
seb--morin wrote:
Well how im going to update my bios? Do i need to but back the old one, and will it start with the 3800?
I don't know much about BIOS updating but on your mobo's website there has to be a manual on how to update your bios, usually in the same folder as the bios.

Usually, it will require you to put the BIOS file on a flash drive or CD, and boot from that device. then the updated BIOS will copy itself over. check on the website though.

"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"

2008-06-03 14:37:38

#18

.Sup: be nice; +2,646|6723|The Twilight Zone

haffeysucks wrote:
.Sup wrote:
seb--morin wrote:
Well how im going to update my bios? Do i need to but back the old one, and will it start with the 3800?
I don't know much about BIOS updating but on your mobo's website there has to be a manual on how to update your bios, usually in the same folder as the bios.
Usually, it will require you to put the BIOS file on a flash drive or CD, and boot from that device. then the updated BIOS will copy itself over. check on the website though.

Ok i know that much, after all i did flash P5E to Rampage Formula

2008-06-03 14:41:45

#19

Brasso: member; +1,549|6900

.Sup wrote:
haffeysucks wrote:
.Sup wrote:
I don't know much about BIOS updating but on your mobo's website there has to be a manual on how to update your bios, usually in the same folder as the bios.
Usually, it will require you to put the BIOS file on a flash drive or CD, and boot from that device. then the updated BIOS will copy itself over. check on the website though.
Ok i know that much, after all i did flash P5E to Rampage Formula

oh yeah! that's basically all there is to it though, how can you say you don't know much about it?

"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"

2008-06-03 14:46:52

#20

.Sup: be nice; +2,646|6723|The Twilight Zone

haffeysucks wrote:
.Sup wrote:
haffeysucks wrote:

Usually, it will require you to put the BIOS file on a flash drive or CD, and boot from that device. then the updated BIOS will copy itself over. check on the website though.
Ok i know that much, after all i did flash P5E to Rampage Formula
oh yeah! that's basically all there is to it though, how can you say you don't know much about it?

I dunno, I'm modest.

2008-06-03 15:32:29

#21

Brasso: member; +1,549|6900

.Sup wrote:
haffeysucks wrote:
.Sup wrote:

Ok i know that much, after all i did flash P5E to Rampage Formula
oh yeah! that's basically all there is to it though, how can you say you don't know much about it?
I dunno, I'm modest.

pft lal

"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"

2008-06-03 16:12:17

#22

Aries_37: arrivederci frog; +368|6845|London

Did you plug in the cpu fan connector?

2008-06-03 16:24:44

#23

Andoura: Got loooollllll ?; +853|6909|Montreal, Qc, Canada

So did it worked?

2008-06-03 22:54:01

#24

seb--morin: Im high; +152|6910|Montréal, Québec

Alright i've used EZ flash from asus bios + a floppy and everything when kinda okay after that! I had to switch back to the 3800 first then once my bios went from ver. 0202 to 1502 i didn't boot with the 3800 but booted with the 5200 then i arrange the CMOS and got a 1 st boot with IRQL NOT LESS OR EQUAL after 5 minutes but now it works!

THANKS A LOT GUYS!

BF2S Forums New CPU ... no boot!

SpIk3y wrote:

Nessie09 wrote:

seb--morin wrote:

Obiwan wrote:

.Sup wrote:

seb--morin wrote:

haffeysucks wrote:

.Sup wrote:

seb--morin wrote:

.Sup wrote:

haffeysucks wrote:

.Sup wrote:

haffeysucks wrote:

.Sup wrote:

haffeysucks wrote:

.Sup wrote:

haffeysucks wrote:

.Sup wrote:

Board footer