So I have a wired router in my basement and a cable comes out of it that is routed in the second floor to another PC in another room. But next to that room (in the second floor) theres is another room I have where I have my PS3. I wanna set wireless for PS3 and I'm also going to buy ASUS EEE PC 901 that I would also want to have it wireless. So would buying a wireless router that would be connected to that cable that is routed to second floor make everything happen? Or would it just act as a switcher and wouldn't allow wireless?
You can do it like that, and thats how I have my network setup.
Ensure you plug the port into the switch port (unless you want it as a seperate network )
You will also have to do the little things such as disabling DHCP on one of the routers, and ensuring the routers dont share the same default IP address
Ensure you plug the port into the switch port (unless you want it as a seperate network )
You will also have to do the little things such as disabling DHCP on one of the routers, and ensuring the routers dont share the same default IP address
Last edited by Titch2349 (2008-08-25 08:52:04)
Why not only use your new wireless router.
That'll work. A switch and an access point should be cheaper though
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
What wireless router should I get? I'll be buying from here: http://www.bof.si/sl/category.cp2?guid= … ;linkid=10
I'm thinking this: http://www.bof.si/sl/product.cp2?guid=4 … ;linkid=15
I'm thinking this: http://www.bof.si/sl/product.cp2?guid=4 … ;linkid=15
Last edited by .Sup (2008-08-25 10:45:47)
Do you need your Wireless router to act as a modem as well?
Sorry, I completely misread your first post. Now I see why you want a wireless router as well as your wired router. My above question is pointless.
The bit of kit you linked to will be fine, I think. I tend to go for Netgear rather than Linksys, but I'm sure one is as good as the other.
The bit of kit you linked to will be fine, I think. I tend to go for Netgear rather than Linksys, but I'm sure one is as good as the other.
Np, I was unsure if anyone will understand me myself.liquidat0r wrote:
Sorry, I completely misread your first post. Now I see why you want a wireless router as well as your wired router. My above question is pointless.
The bit of kit you linked to will be fine, I think. I tend to go for Netgear rather than Linksys, but I'm sure one is as good as the other.
Currently I have a wired Netgear router and it seems to work fine but this IT expert who also sets up my networks says Linksys is the way to go. How difficult is to set wireless? I haven't done it before. I will be connecting 3 laptops and PS3. And Titch also mentioned disabling DHCP. Why do I have to do it and how.
I reckon it would work or could you connect a wireless router to your basement connection but move out out of the basement?
.Sup wrote:
But I really need wireless so I have have Internet in 3 rooms in second floor without any cables. I only need to buy a wireless router right?max wrote:
That'll work. A switch and an access point should be cheaper though
That's what I said. Get a switch and a (wireless) access point. No need for a router since you already have one for DHCP/firewall/...
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
Ordered this: http://www.newegg.com/Product/Product.a … 6833124012
can't you just use a WRT54G (cheaper, around $50 I think) and convert it with DD-WRT firmware?.Sup wrote:
Ordered this: http://www.newegg.com/Product/Product.a … 6833124012
"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"
Sounds like a lot of poking around. Its easier this way (more expensive I know).haffeysucks wrote:
can't you just use a WRT54G (cheaper, around $50 I think) and convert it with DD-WRT firmware?.Sup wrote:
Ordered this: http://www.newegg.com/Product/Product.a … 6833124012
pretty simple to install the DD-WRT firmware and if you need a router in the future you could always convert it back.Sup wrote:
Sounds like a lot of poking around. Its easier this way (more expensive I know).haffeysucks wrote:
can't you just use a WRT54G (cheaper, around $50 I think) and convert it with DD-WRT firmware?.Sup wrote:
Ordered this: http://www.newegg.com/Product/Product.a … 6833124012
"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"
I had a wireless router before and it gave me headaches but it was a crappy Canyon router. Fucking immense lag in online games.haffeysucks wrote:
pretty simple to install the DD-WRT firmware and if you need a router in the future you could always convert it back.Sup wrote:
Sounds like a lot of poking around. Its easier this way (more expensive I know).haffeysucks wrote:
can't you just use a WRT54G (cheaper, around $50 I think) and convert it with DD-WRT firmware?
Setting it up is almost as easy as plugging it in.
In fact, from ones I have dealt with all you really need to do is plug it in... But its best to set up the security stuff too.
Best advice would be RTFM (or part) but it basically involves using a computer connected to the router, opening up a web browser and typing in "http://192.168.1.1/" it will ask you for user name and password... Default is usually something like Administrator/Password (but you can find out for sure in your manual)
all routers have different menus, but it should be easy enough to figure out. Change at least the password, and set an encryption key.
In fact, from ones I have dealt with all you really need to do is plug it in... But its best to set up the security stuff too.
Best advice would be RTFM (or part) but it basically involves using a computer connected to the router, opening up a web browser and typing in "http://192.168.1.1/" it will ask you for user name and password... Default is usually something like Administrator/Password (but you can find out for sure in your manual)
all routers have different menus, but it should be easy enough to figure out. Change at least the password, and set an encryption key.
It's really not difficult at all. There'll be a nice leaflet in the packaging explaining how to do it anyway..Sup wrote:
How difficult is to set wireless? I haven't done it before. I will be connecting 3 laptops and PS3. And Titch also mentioned disabling DHCP. Why do I have to do it and how.
DHCP gives out IP addresses, so to speak. You can't have two devices assigning IP addresses at once, so you disable it. There'll be a pretty obvious checkbox on the admin panel.
Routers have DHCP.
Switches do not.
Wireless is quite easy to set up. However, you have to be mindful of your protection because you don't want tards trying to DoS your network via your wireless..Sup wrote:
How difficult is to set wireless? I haven't done it before. I will be connecting 3 laptops and PS3.
Layer 3 switches can. More of a relay but still.liquidat0r wrote:
Routers have DHCP.
Switches do not.
Last edited by killer21 (2008-08-26 04:50:36)
So I got the access point and connected the Acer laptop easily. But with the other laptop HP n800v I'm having problems. It says no wireless driver is installed even though I just installed it. http://h20000.www2.hp.com/bizsupport/Te … 1093#11395 i installed this all drivers except this one: EMEA Mobile PhoneTools Update for GPRS Multiport. It says no wireless connections found. Anyone else having HP laptop I would appreciate his help.
I installed all drivers and the HP client manager says the wireless network card is installed but the driver is not.
I installed all drivers and the HP client manager says the wireless network card is installed but the driver is not.
Last edited by .Sup (2008-08-29 09:15:20)
Just don't forget to secure it, I can't tell you how many people don't secure it, or change the pw to the router. Dumb idea.