• Index » 
  • Community » 
  • Tech » 
  • Will a Antec 650w Earthwatts PSU works with a ATi 4870 512Mb
Little BaBy JESUS
m8
+394|6415|'straya
Well the title pretty much sums it up... i wasnt a 100% because of varying info i was getting... the 650w earthwatts is on ATi recommended PSU list for the 4870.

however, the 4870 takes 2 6 pin connectors (i think) but the antec website says the 650w only has 1.

if this combo does not work can u recommend me a good PSU (650w preferably) that will work.

Thanks.
max
Vela Incident
+1,652|6834|NYC / Hamburg

other components?
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot  xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
Little BaBy JESUS
m8
+394|6415|'straya

max wrote:

other components?
Build in previous topic

P5Q PRO motherboard
4 GB 1066 Mhz DDR2 RAM
Antec P182 Case +extra 120mm fan
Scythe Ninja CPU cooler
750GB Samsung 7200 RPM HDD
max
Vela Incident
+1,652|6834|NYC / Hamburg

Little BaBy JESUS wrote:

max wrote:

other components?
Build in previous topic

P5Q PRO motherboard
4 GB 1066 Mhz DDR2 RAM
Antec P182 Case +extra 120mm fan
Scythe Ninja CPU cooler
750GB Samsung 7200 RPM HDD
I don't memorize all builds

anyhow

It'll work easily. Nitteo ran quad 8800GTs off a 430W eathwatts. For the second PCI-e 6pin plug you can just get a molex adaptor
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot  xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
Little BaBy JESUS
m8
+394|6415|'straya

max wrote:

Little BaBy JESUS wrote:

max wrote:

other components?
Build in previous topic

P5Q PRO motherboard
4 GB 1066 Mhz DDR2 RAM
Antec P182 Case +extra 120mm fan
Scythe Ninja CPU cooler
750GB Samsung 7200 RPM HDD
I don't memorize all builds

anyhow

It'll work easily. Nitteo ran quad 8800GTs off a 430W eathwatts. For the second PCI-e 6pin plug you can just get a molex adaptor
so what exact type of molex adaptor (might sound noob but i just wanna get it right lol)
Varegg
Support fanatic :-)
+2,206|7076|NÃ¥rvei

It's recommended 550W for the 4870 512mb last i saw ... but then again (and we did discuss this before max remember?) go for the bigger PSU ... a small PSU going at full load is not as good as a bigger PSU with the same load ...
Wait behind the line ..............................................................
max
Vela Incident
+1,652|6834|NYC / Hamburg

Little BaBy JESUS wrote:

so what exact type of molex adaptor (might sound noob but i just wanna get it right lol)
https://www.materiel.net/live/32249.jpg


Varegg wrote:

It's recommended 550W for the 4870 512mb last i saw ... but then again (and we did discuss this before max remember?) go for the bigger PSU ... a small PSU going at full load is not as good as a bigger PSU with the same load ...
I remember... In the end it doesn't make that much of a difference. The efficiency of a ~550W PSU should be slightly higher with his config. But you do loose some of the upgrade path. You won't come close to using a 550W PSU at full load. He'll pull maybe 300W at max with this config ...
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot  xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
  • Index » 
  • Community » 
  • Tech » 
  • Will a Antec 650w Earthwatts PSU works with a ATi 4870 512Mb

Board footer

Privacy Policy - © 2025 Jeff Minard