ghettoperson
Member
+1,943|6910

After having it caseless for about 2 weeks, I figured I should get around to finishing it off. The paint isn't perfect, and it comes off far too easily in some contact areas, like where the door hinges at the bottom, but I'm pretty happy with it. My cable management was fucking awesome, but I then couldn't get the other door to close, so I had to undo some of it. I'll probably neaten it up at some point, but for the moment it's alright.

Pictars!

https://farm4.static.flickr.com/3573/3822487049_e19b2b011d.jpg

https://farm3.static.flickr.com/2503/3822488789_c827a56d8e.jpg
Chorcai
Member
+49|6908|Ireland

ghettoperson wrote:

After having it caseless for about 2 weeks, I figured I should get around to finishing it off. The paint isn't perfect, and it comes off far too easily in some contact areas, like where the door hinges at the bottom,
Did you key it ? also try this if you plan on repainting it.

This was the 1st site that came up when I goooooogle but Ive used similar stuff before.

http://www.rustoleum.com/cbgproduct.asp?pid=119
ghettoperson
Member
+1,943|6910

Key it? Not sure what that means. In any case, I sanded it down, primed it and put maybe 3 layers of spray paint on top.
Chorcai
Member
+49|6908|Ireland

ghettoperson wrote:

Key it? Not sure what that means. In any case, I sanded it down, primed it and put maybe 3 layers of spray paint on top.
Strange with a primmer + 3 finishs should be flawless.

key/prime same same.
jsnipy
...
+3,277|6783|...

Perhaps an clear acrylic top coat? Besides it should take a good two weeks for the paint to actually cure (not just dry to the touch).
FatherTed
xD
+3,936|6760|so randum

jsnipy wrote:

Perhaps an clear acrylic top coat? Besides it should take a good two weeks for the paint to actually cure (not just dry to the touch).
This
Small hourglass island
Always raining and foggy
Use an umbrella
FFLink
There is.
+1,380|6951|Devon, England
Needs a MoBo back plate.

Board footer

Privacy Policy - © 2025 Jeff Minard