so I recently bought a new voip headset so I can play properly with my squad, but when I try to set it up it cammo thing it does not pick up any sound, altho other programs do. Help would be greatly appreciated
make sure its not muted in the windows sound config.
Cpanel>sounds and audio devices> the voices tab.
also make sure its whats selected. if its not usb also make sure its plugged into the correct port(s).
Cpanel>sounds and audio devices> the voices tab.
also make sure its whats selected. if its not usb also make sure its plugged into the correct port(s).
thanks but I've done all that, and I am able to record sounds using it in other programs and chat over IM, which is why I'm so baffed
have u tried to just log in and see if it works. other ppl have said it doesnt work in the cammo setup but it works in game(happens with usb some times).
if its usb go into the control panel and make sure its set as the default device(make sure to apply the changes if needed.)
after u load the cammo vioce prog make sure it doesnt show as muted in the sound config. if it is then just unplug it and plug it back in when the cammo setup is running.
Edit: there is also a slider called "voice capture volume" make sure its to the right and not all the way left.
if its usb go into the control panel and make sure its set as the default device(make sure to apply the changes if needed.)
after u load the cammo vioce prog make sure it doesnt show as muted in the sound config. if it is then just unplug it and plug it back in when the cammo setup is running.
Edit: there is also a slider called "voice capture volume" make sure its to the right and not all the way left.
It could be your sound chip. BF2 has issues with Realtek AC'97 chips if you have that one.
My m8 couldn't use the ingame VOIP because of the chip, we solved it by turning the hardware acceelration right down .
you can do this by clicking start > run and typing in dxdiag, click on the sound tab and move the acceleration slider right down, it should work then.
Dunno if this would solve issues with other sound chips but it solved it with the realtek AC'97
My m8 couldn't use the ingame VOIP because of the chip, we solved it by turning the hardware acceelration right down .
you can do this by clicking start > run and typing in dxdiag, click on the sound tab and move the acceleration slider right down, it should work then.
Dunno if this would solve issues with other sound chips but it solved it with the realtek AC'97
kl I might just try it in game. My sound card is a sigma audio tel HD sound card
When i used VOIP i found i couldnt talk either. After messing around I found out that the Boost Mic thing in the audio bit was causing it to not work. Its a long shot but it worked for me!
if u didnt see it already u may wanna check this out also.
http://forums.bf2s.com/viewtopic.php?id=22188
http://forums.bf2s.com/viewtopic.php?id=22188
I have an on-board Realtek AC'97 and never had any issues with it in game VOIP or with Teamspeak.
thnks for all the help. One more question, what is the voip server in the bf2 folder for?
its for running ur own server with VOIP.
cheers for all da help
+1s away
+1s away
One of the lucky ones then killbilly, after researching the problem came across a few posts where people were having VOIP probs and it was down to the Realtek chip, followed their advice and it was fixed here's a post on the EA forums [url=http://forum.eagames.co.uk/viewtopic.php?t=603]here[/url]KillBilly666 wrote:
I have an on-board Realtek AC'97 and never had any issues with it in game VOIP or with Teamspeak.