I need a link for gigabyte drivers download

2006-10-03 10:15:30

#1

Breez: AKA: badhq; +937|7080|Derby, England

Im having problem finding this download

GIGABYTE GA-7VASFS F5 FSC it has to be in english I found one but its in german also Fujitsu workes could give me a hand I know there are few of you that work for them )

HELP

2006-10-03 10:21:39

#2

basetballjones: Member; +30|7197

Dayum. I bought an ITX865PE (Forgot the OEM designations) which is also a fujitsu/seimens/gigabyte model. I only found drivers at Driverguide and they were for later revision of the same board.

What you can do:

Go to Intel for the chipset drivers
Go to marvell (which is likely the type of NIC it has)
Then over to Realtec for the audio

These are the most commonly used manufacturers with Gbyte, but take a look at the chips themselves for a name if you are in doubt.

I misread, you are looking for the manual, correct?

Call gigabyte directly for the crossover model number, then you can download the manual for the original/pre-fujitsu board.
The only difference is that fujitsu often locks overclocking and voltage settings in bios.. things like easytune, CIA, MIB will nopt usually work on a Fujitsu board..

Also ask Gnyte what the prefered bios would be so you can flash that sucker already.

Last edited by basetballjones (2006-10-03 10:24:42)

2006-10-03 11:01:45

#3

Breez: AKA: badhq; +937|7080|Derby, England

U go tlinks for them bro ?

Also is there a PC diagnostics tool where it can tell me where the problem is ? as Im about to put my foot trough this PC

2006-10-03 12:19:30

#4

Breez: AKA: badhq; +937|7080|Derby, England

Anyone ? or does sumeone have a link how to flush bios ? i dont think it's graphics card as i toke it back and they tested in fronyt of me :s they used same softwere i used to test the 3D settings

2006-10-03 15:30:09

#5

Twist: Too old to be doing this sh*t; +103|6971|Little blue planet, milky way

This one ?
http://www.gigabyte.com.tw/Support/Moth … uctID=1409
Or this one ?
http://www.gigabyte.com.tw/Support/Moth … uctID=1638

2006-10-03 15:31:41

#6

Brasso: member; +1,549|7078

http://www.google.com/search?sourceid=n … te+drivers

Google FTW.

"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"

2006-10-04 03:04:22

#7

Breez: AKA: badhq; +937|7080|Derby, England

Twist wrote:
This one ?
http://www.gigabyte.com.tw/Support/Moth … uctID=1409
Or this one ?
http://www.gigabyte.com.tw/Support/Moth … uctID=1638

Links are good but that dident help my issue my pc still restarts if i start any game I know its not GFX problem as I toke it back and they run the test in front of me then they give me the disk they use to do a test called 3DMark tool soon as I did same test on my pc boom crash restart here is the info

Any help would be apprishiated

haffeysucks wrote:
http://www.google.com/search?sourceid=n … te+drivers

Google FTW.

Thanks for that link bro still no joy

2006-10-04 03:18:38

#8

DoctorFruitloop: Level 13 Wrongdoer; +515|6994|Doncaster, UK

May I suggest PMing either Joker3327 or Skoobydu. They both work over at Fujitsu. Worth a try Boris

2006-10-04 03:22:33

#9

Breez: AKA: badhq; +937|7080|Derby, England

DoctorFruitloop wrote:
May I suggest PMing either Joker3327 or Skoobydu. They both work over at Fujitsu. Worth a try Boris

Thats who UIm looking for :-)

2006-10-04 04:31:57

#10

SkoobyDu: 'CLICK JOIN NOW'... OK lets go... BOOM!!!! =FFS=; +120|7009|Cheshire, UK

There would be a PM for you If I hadn't had this message for the last 15 minutes...

At least 60 seconds have to pass between sends. Please wait a little while and try send the message again.

2006-10-04 04:37:42

#11

DoctorFruitloop: Level 13 Wrongdoer; +515|6994|Doncaster, UK

SkoobyDu wrote:
There would be a PM for you If I hadn't had this message for the last 15 minutes...

At least 60 seconds have to pass between sends. Please wait a little while and try send the message again.

https://img.photobucket.com/albums/v80/Ramases_Niblick_III/BadHQ%20Smileys/emo19.gif

Billy the Bomb says, "60 seconds this!"

2006-10-04 04:44:03

#12

SkoobyDu: 'CLICK JOIN NOW'... OK lets go... BOOM!!!! =FFS=; +120|7009|Cheshire, UK

Check your messages

2006-10-04 04:45:09

#13

SkoobyDu: 'CLICK JOIN NOW'... OK lets go... BOOM!!!! =FFS=; +120|7009|Cheshire, UK

DoctorFruitloop wrote:
SkoobyDu wrote:
There would be a PM for you If I hadn't had this message for the last 15 minutes...

At least 60 seconds have to pass between sends. Please wait a little while and try send the message again.

http://img.photobucket.com/albums/v80/R … /emo19.gif
Billy the Bomb says, "60 seconds this!"

Billy looks angry

2006-10-04 04:46:09

#14

SkoobyDu: 'CLICK JOIN NOW'... OK lets go... BOOM!!!! =FFS=; +120|7009|Cheshire, UK

If I have correctly identified your system then I have the driver your after

2006-10-04 04:50:57

#15

DSRTurtle: Member; +56|7134

http://www.gigabyte.com.tw/

You will have to look for your product, but the driver downloads for english should be there. I have a GA-7VAXP board and found my drivers in english.

Thanks for the thread. I found a new sound driver for mine.

Last edited by DSRTurtle (2006-10-04 04:53:24)

2006-10-04 04:54:22

#16

SkoobyDu: 'CLICK JOIN NOW'... OK lets go... BOOM!!!! =FFS=; +120|7009|Cheshire, UK

I have sent you the links and processes, let me know how you get on.

2006-10-04 05:26:54

#17

Breez: AKA: badhq; +937|7080|Derby, England

SkoobyDu wrote:
I have sent you the links and processes, let me know how you get on.

I replyed back bro Thanks for the link :-)

2006-10-04 05:53:02

#18

TheEternalPessimist: Wibble; +412|7068|Mhz

Dude is your CPU supposed to be running that slow?! I can't remember AMD making a CPU below 1.8Ghz with a 512k cache on it 0_o (could well be wrong on that point)

it looks to me like your FSB has reset to defaut. (probably whouldn't make your pc crash either but its worth a bash)

If you know exactly what CPU u have in there I'll fish out the correct FSB setting for you (im gonna take a stab at an Athlon 2800+? that'd be 166Mhz x 12.5 Makin it 2.08Ghz

EDIT: I just did a little lookin around and theres deffinatly no Barton Core AMD in existance that runs at 1.25Ghz so its very very wrong.

Multiplier is locked at x12.5 so your FSB has been knocked down to 100Mhz at some point, bung it on 133, 166, or 200Mhz depending on what it should be.

Last edited by TheEternalPessimist (2006-10-04 06:03:33)

2006-10-04 07:53:18

#19

Breez: AKA: badhq; +937|7080|Derby, England

TheEternalPessimist wrote:
Dude is your CPU supposed to be running that slow?! I can't remember AMD making a CPU below 1.8Ghz with a 512k cache on it 0_o (could well be wrong on that point)

it looks to me like your FSB has reset to defaut. (probably whouldn't make your pc crash either but its worth a bash)

If you know exactly what CPU u have in there I'll fish out the correct FSB setting for you (im gonna take a stab at an Athlon 2800+? that'd be 166Mhz x 12.5 Makin it 2.08Ghz

EDIT: I just did a little lookin around and theres deffinatly no Barton Core AMD in existance that runs at 1.25Ghz so its very very wrong.

Multiplier is locked at x12.5 so your FSB has been knocked down to 100Mhz at some point, bung it on 133, 166, or 200Mhz depending on what it should be.

Is there sum sort of tool that lets me change it? as I dont have a manual settings in BIOS for that my Bios version is F5

BF2S Forums I need a link for gigabyte drivers download

Twist wrote:

haffeysucks wrote:

DoctorFruitloop wrote:

SkoobyDu wrote:

DoctorFruitloop wrote:

SkoobyDu wrote:

SkoobyDu wrote:

TheEternalPessimist wrote:

Board footer